web design

preparations. The unique design of the NERVE2 chamber includes: Deep Reservoir (35mL) for containing Ringers or other solutions Drain (with valve & hose) to facilitate extended viability of your preparation Each stainless steel pin is spaced 5 mm apart to provide a variety of recording and stimulating configurations. The sockets accept 2 mm plugs and interface with the BSLCBL2A stimulation cable and the BSLCBL4B recording cable. See Lesson A03 Compound Action Potential : Nerve Conduction Using the Frog Sciatic Nerve.

to match your research design. Software runs on Mac OS X 10.3 and higher. Topics AcqKnowledge backwards compatibility Amplifier analog output signals Automated EEG analysis Automated EMG analysis Automated scoring of electrodermal activity data Band-pass and band-stop filters Buffer overflow Common mistakes/general troubleshooting Comparing HRV results Compatibility: OS & Computer Requirements

to match your research design. The MP150 offers: Ethernet-ready data acquisition and analysis Record multiple channels with differing sample rates Record at speeds up to 400 kHz (aggregate) Place one or more MP150 Systems in a local area network (LAN). Use any Macintosh in the LAN to record from any MP150 system in the network. Software runs on Mac OS X 10.3 and higher. Topics

In keeping with the modular design, the TEL100C will work with your current MP System and any other standard 100-series amplifiers. Up to four TEL100C module sets can be used with a single MP System. Each channel incorporates a switchable, non-distorting 50/60 Hz interference filter. Gain and bandwidth can be adjusted independently for each channel. The TEL100C System includes: 1 x TEL100D-C receiver module 1 x TEL100M-C portable amplifier/transmitter 1 x CBL117 10 meter connection cable See Application Note #AH103 for connection details, operational guidelines, and detailed specifications. For wireless

The pliable and unobtrusive design conforms readily to body contours. They come with a Velcro strap for easy attachment. The frequency response extends from DC to 500 Hz. The accelerometers are extremely accurate and can easily be calibrated by simply changing their orientation in three-dimensional space, so that gravity (G=1) acts only upon the desired axis. The TSD109 series accelerometers connect directly to the HLT100C High Level Transducer module. Attachment Guidelines: To prevent cable stress/tugging when the subject moves, which might affect the sensor, tape the cable to the subject. Tape the cable at a point a

In keeping with the modular design, the TEL100C will work with your current MP System and any other standard 100-series amplifiers. Up to four TEL100C module sets can be used with a single MP System. Each channel incorporates a switchable, non-distorting 50/60 Hz interference filter. Gain and bandwidth can be adjusted independently for each channel. The TEL100C System includes: 1 x TEL100D-C receiver module 1 x TEL100M-C portable amplifier/transmitter 1 x CBL117 10 meter connection cable See Application Note #AH103 for connection details, operational guidelines, and detailed specifications. For wireless

to match your research design. The NEW MP150 offers: Ethernet-ready data acquisition and analysis Record multiple channels with differing sample rates Record at speeds up to 400 kHz (aggregate) Place one or more MP150 Systems in a local area network (LAN). Use any PC in the LAN to record from any MP150 system in the network. Compatibility Note—T he MP150WSW Systems ships with an ETHCARD1 for desktop computers. If preferred, specify ETHCARD2 when ordering; ETHCARD2 is a 10/100Mbps Fast Ethernet 32-bit CardBus adapter for notebooks. Available in Your Native Language

(i.e. ABR). The Tubephone design consists of a monaural acoustic transducer attached to a short, flexible, plastic tube, which fits into the subjects ear with the aid of a foam tip. Use of the Tubephone reduces ambient noise and bone conduction problems, which can interfere with auditory response recordings. Furthermore, because the Tubephone provides a 1 msec acoustic signal delay (due to plastic tube), it automatically separates true response from electromagnetic artifact resulting from speaker activation.

In keeping with the modular design, the TEL100C will work with your current MP System and any other standard 100-series amplifiers. Up to four TEL100C module sets can be used with a single MP System. Each channel incorporates a switchable, non-distorting 50/60 Hz interference filter. Gain and bandwidth can be adjusted independently for each channel. The TEL100C System includes: 1 x TEL100D-C receiver module 1 x TEL100M-C portable amplifier/transmitter 1 x CBL117 10 meter connection cable See Application Note #AH103 for connection details, operational guidelines, and detailed specifications. For wireless

to match your research design. The MP150 offers: Ethernet-ready data acquisition and analysis Record multiple channels with differing sample rates Record at speeds up to 400 kHz (aggregate) Place one or more MP150 Systems in a local area network (LAN). Use any Macintosh in the LAN to record from any MP150 system in the network. Software runs on Mac OS X 10.3 and higher. You might also be interested in the following items: